How to use Pure Force
Commercial-grade cleaning power with simple, safe dilutions.

Spray & Wipe (benchtops, stainless, appliances)
Routine: 1:25 — add 40 mL per 1 L water. | Grimy: 1:15 — add 65 mL per 1 L water.
Fill bottle with measured water, then add the calculated concentrate (don’t invert the order).
Spray surface and allow a brief dwell (30–90 s) for chemistry to work.
Agitate with a microfiber or brush; wipe clean.
For food-prep or high-touch areas, finish with a potable water rinse if required by your SOP.

Floors (mop & autoscrubber)
Standard: 1:100 — add 10 mL per 1 L water. | Dirty/greasy: 1:25 — add 40 mL per 1 L water.
Bucket size | 1:100 | 1:25 |
---|---|---|
5 L | 50 mL | 200 mL |
8 L | 80 mL | 320 mL |
10 L | 100 mL | 400 mL |
Pre-dust/vacuum. Mix solution in bucket or machine tank.
Mop in sections. On heavy soil, allow 2–3 min dwell before pick-up.
Rinse mop/brushes after use; let floors air-dry.

Glass & Mirrors (streak-free)
1:100 — add 10 mL per 1 L water.
Lightly mist the surface.
Wipe with a clean, low-lint microfiber; finish with a dry side to buff clear.

Bathroom, Tiles & Soap Scum
Standard: 1:10 — add 100 mL/L water. | Heavy/Grout: 1:2 — add 500 mL/L water.
Apply evenly. Keep surfaces wet during dwell (5–10 min).
Scrub grout/soap scum with a nylon brush or pad.
Rinse thoroughly. Squeegee or towel-dry to a shine.

Heavy Grease, Ovens & BBQ
Built-up grease: 1:1 (equal parts). | Carbonised deposits: Neat.
Apply to cool surfaces; avoid hot elements.
Allow 5–15 min dwell. Agitate with a scraper or grill brush.
Rinse thoroughly. Repeat or increase strength if needed.

Where you can use Pure Force













Safety, proof & SDS
- Biodegradable, residue-free when used as directed.
- Independently tested for cleaning performance and batch consistency.
- Do not mix with bleach or acidic products.
Need the paperwork? Download SDS.